GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2009 🢒 XLR 🢒 Body Systems 🢒 Vehicle Access 🢒 Rear Compartment Door Manual Release Replacement

Removal Procedure

    Object Number: 1244726 Size: SH
  1. Unscrew and remove both cargo net hooks from the driver side trim panel in the rear compartment.
  2. Pull the trim away from the body.
  3. Guide the end of the door release cable through the slit in the trim panel, toward the body. The release is in the driver side trim panel, behind a trap door with the fuel door release.
  4. Remove the fastener (1) from the retaining bracket that holds the rear-mounted door release cable.
  5. Lift the driver side carpet from the rear compartment floor to expose the rear-mounted door release cable.

    6. Object Number: 1071067 Size: SH
  6. Separate the fingers (2) of the retainers in order to free the cable (1).

    7. Warning: Refer to Battery Disconnect Warning in the Preface section.

  7. Disconnect the battery.
  8. Remove the doorsill trim. Refer to Carpet Retainer Replacement.
  9. Remove the B-Pillar interior trim. Refer to Rear Quarter Trim Panel Replacement.

    10. Object Number: 1071088 Size: SH
  10. Remove the mastic cover (1) from the door latch access hole in the body.

    11. Object Number: 1070880 Size: SH
  11. Remove the fasteners (1) from the B-Pillar mounted door latch (3).

    12. Object Number: 1070834 Size: SH
  12. Remove the latch (1) from the body access hole.

    13. Object Number: 929153 Size: SH
  13. Slide the electrical connector lock (1) to the unlocked position. Remove the connector from the door latch.

    14. Object Number: 1291920 Size: SH
  14. Remove the fasteners from the rear latch cover securing the cables.
  15. Release the cable sheath ends. Remove the latch cover.
  16. Remove the cable end by rotating the cable a quarter turn to disengage from the latch actuating lever. The floor mounted release cable is attached to the lower lever on the latch.
  17. Attach a mechanic's wire to the latch end of the cable in order to assist in guiding the replacement cable back into position.
  18. Pull the cable from the rear compartment end, and guide it out through the trim panel in the rear compartment.

Installation Procedure

    Object Number: 1291920 Size: SH
  1. Attach the replacement cable end to the mechanic's wire.
  2. Pull the mechanics wire back through the carpet, guiding the cable toward the latch.
  3. Install the cable end on the latch by rotating the cable a quarter turn to engage the cable end to the latch actuating lever.
  4. Seat the cables into the molded latch cover recess. Install the latch cover.

    5. Caution: Refer to Fastener Caution in the Preface section.

  5. Install the latch cover fasteners to the latch and tighten to 2 N·m (18 lb in).

    6. Object Number: 929153 Size: SH
  6. Install the electrical connector. Slide the connector lock (1) to the seated position on the door latch mechanism.

    7. Object Number: 1070834 Size: SH
  7. Place the latch (1) in the body access hole, aligning the fastener holes to the body.

    8. Object Number: 1070880 Size: SH
  8. Install the fasteners (1) through the cover plate (2) and to the B-Pillar mounted door latch (3) and tighten to 10 N·m (89 lb in).

    9. Object Number: 1244726 Size: SH
  9. Install the fastener (1) to the bracket retaining the rear door release cable (2) and tighten to 3 N·m (27 lb in).
  10. Guide the end of the door release cable through the slit in the trim panel toward the rear compartment area.
  11. Seat the trim panel to the body, and screw in both cargo net hooks to the driver side trim panel in the rear compartment.
  12. Connect the battery.
  13. Verify the operation of the latch using the front and rear manual release. Verify the key fob, the door touch pad, and the door panel electrical actuators.

    14. Object Number: 1071088 Size: SH
  14. Install the new mastic cover (1) over the latch access hole in the body.
  15. Install the B-Pillar interior trim. Refer to Rear Quarter Trim Panel Replacement.
  16. Install the doorsill trim. Refer to Carpet Retainer Replacement.