For 1990-2009 cars only
Removal Procedure
- Open the instrument panel (I/P) compartment door.
- Remove the trim bezel from the I/P compartment. Refer to Instrument Panel Compartment Trim Bezel Replacement in Instrument Panel, Gages, and Console.
- Remove the I/P antenna by pulling to disengage the antenna from the retaining bracket.
- Disconnect the lead connector from the antenna wire harness.
Installation Procedure
- Position the antenna to the I/P carrier.
- Connect the wire harness lead to the antenna.
- Push on the antenna to install the antenna to the retaining bracket.
- Install the trim bezel to the I/P compartment. Refer to Instrument Panel Compartment Trim Bezel Replacement in Instrument Panel, Gages, and Console.
- Close the I/P compartment door.
