GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2006 🢒 XLR 🢒 Engine 🢒 Engine Controls - 4.4L 🢒 Fuel Tank Pressure Sensor Replacement

Removal Procedure

    Object Number: 561137 Size: SH
  1. Remove the right rear wheelhouse liner panel. Refer to Rear Wheelhouse Panel Liner Replacement .
  2. Remove the evaporative emission (EVAP) canister access cover.

    3. Object Number: 1767511 Size: SH
  3. Disconnect the fuel tank pressure sensor electrical connector (1) located on the right side fuel tank module.

    4. Object Number: 1767512 Size: SH
  4. Remove the fuel tank pressure sensor (2) by carefully prying the sensor out of the fuel tank.

Installation Procedure

    Object Number: 1767512 Size: SH
  1. Lubricate the fuel tank pressure sensor rubber grommet with clean engine oil in order to aid in installation.
  2. Install the fuel tank pressure sensor (1) into the top of the fuel tank module.

    3. Object Number: 1767511 Size: SH
  3. Connect the fuel tank pressure sensor electrical connector (1).

    4. Object Number: 561137 Size: SH
  4. Install the EVAP canister access cover.
  5. Install the right rear wheelhouse liner panel. Refer to Rear Wheelhouse Panel Liner Replacement .