GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2001 🢒 Seville - RHD 🢒 Body and Accessories 🢒 Doors 🢒 Rear Side Door Window Inner Sealing Strip Replacement

Removal Procedure
  1. Remove the door trim panel. Refer to Rear Side Door Trim Panel Replacement .
  2. Remove the garnish molding. Refer to Rear Door Opening Frame Garnish Molding Replacement .

    3. Object Number: 334521 Size: SH
  3. Starting at one end of the door window inner belt molding, pull upward in order to release the molding.

Installation Procedure

    Object Number: 607350 Size: SH
  1. Position the inner belt molding (1) over the flange of the door inner panel (3).
  2. Position the notch in the belt molding to the rear stationary window frame.
  3. Press down in order engage the inner belt molding (1) the entire length, being careful not to distort the belt molding.
  4. Install the garnish molding. Refer to Rear Door Opening Frame Garnish Molding Replacement .
  5. Install the door trim panel. Refer to Rear Side Door Trim Panel Replacement .