GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2001 🢒 Seville - RHD 🢒 Body and Accessories 🢒 Cruise Control 🢒 Cruise Control Module Replacement

Removal Procedure

    Object Number: 141846 Size: SH
  1. Remove the cruise control cable. Refer to Cruise Control Cable Replacement .
  2. Remove the electrical connector from the cruise control module assembly (1).
  3. Remove the fasteners (2) from the mounting studs.
  4. Remove the cruise control module assembly (1) from the vehicle.

    5. Object Number: 141841 Size: SH
  5. Remove the fasteners (3) that retain the cruise control module bracket (2) to the cruise control module.
  6. Remove the cruise control module bracket (2) from the cruise control module (1).

Installation Procedure

    Object Number: 141841 Size: SH
  1. Install the cruise control module (1) to the bracket (2).

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the cruise control module bracket fasteners (3).

    3. Tighten
    Tighten the fasteners to 7.5 N·m (66 lb in).


    Object Number: 141846 Size: SH
  3. Install the cruise control module (1) onto the studs on the cowl.
  4. Install the fasteners (2).

    5. Tighten
    Tighten the cruise control mounting fasteners to 9 N·m (80 lb in).

  5. Connect the electrical connector to the cruise control module (1).
  6. Install the cruise control cable. Refer to Cruise Control Cable Replacement .