For 1990-2009 cars only
Removal Procedure
- Push in and up on the front of the rear seat cushion.
- Lift up and out on the seat cushion.
- Disconnect heated seat electrical connectors (if equipped).
- Remove the rear seat cushion from the vehicle.
Installation Procedure
- Install the rear seat cushion into the vehicle.
- Connect the heated seat electrical connectors (if equipped).
- Engage two locator tabs into the wire loops in the bottom of the rear seat back.
- Push down and rearward to seat the rear seat cushion into the latches in the number four bar.
Important: Pull up on the front of the rear seat cushion to ensure that the cushion is secure.
