Stop Lamp Switch Replacement LHD

1. Remove the left sound insulator. Refer to Instrument Panel Insulator Panel Replacement - Left Side in Instrument Panel, Gauges and Console.
2. Rotate the stoplamp/ABS/shift lock switch (2) counterclockwise, then pull to remove the switch.
3. Disconnect the electrical connectors from the switch.

1. Connect the stoplamp/ABS/shift lock switch electrical connectors to the stoplamp switch (2).
2. Install the stoplamp switch into the retainer.
3. Press the switch (2) into the retainer until the switch plunger is fully depressed into the switch barrel.
4. Rotate the switch (2) clockwise until travel has stopped and the switch locks fully into position.
5. Install sound insulator. Refer to Instrument Panel Insulator Panel Replacement - Left Side in Instrument Panel, Gauges and Console.

Stop Lamp Switch Replacement RHD

1. Remove the right closeout/sound insulator. Refer to Instrument Panel Insulator Panel Replacement - Right Side in Instrument Panel, Gauges and Console.
2. Rotate the stoplamp/ABS/shift lock switch (2) counterclockwise, then pull to remove the switch.
3. Disconnect the electrical connectors from the switch.

1. Connect the stoplamp/ABS/shift lock switch electrical connectors to the stoplamp switch (2).
2. Install the stoplamp switch into the retainer.
3. Press the switch (2) into the retainer until the switch plunger is fully depressed into the switch barrel.
4. Rotate the switch (2) clockwise until travel has stopped and the switch locks fully into position.
5. Install the right closeout/sound insulator. Refer to Instrument Panel Insulator Panel Replacement - Right Side in Instrument Panel, Gauges and Console.