Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Was the entire Fog Lights System Check performed? | -- | Go to Fog Lights System Check | |
2 |
Does the scan tool indicate that the switch is ON when operated and OFF when inactive? | -- | ||
3 |
Does the test lamp light? | -- | ||
4 | Replace the FOG LP Relay. Refer to Wiring Repairs in Wiring Systems. Do both front fog lamps now operate properly? | -- | Go to Fog Lights System Check | |
5 | Replace the underhood junction block . Refer to Underhood Fuse Block Replacement in Engine Electrical. Is the underhood junction block replacement complete? | -- | Go to Fog Lights System Check | -- |
6 |
Is the resistance less than the specified value? | 5 ohms | ||
7 | Replace the dash integration module (DIM). Refer to Body Control Module Replacement in Body Control System. Is the DIM replacement complete? | -- | Go to Fog Lights System Check | -- |
8 |
Does the test lamp light? | -- | ||
9 | Repair the open in CKT 192 (ORN) between the IPM and the fog lamp switch. Refer to Wiring Repairs in Wiring Systems. Is the circuit repair complete? | -- | Go to Fog Lights System Check | -- |
10 | Backprobe the fog lamp switch connector with a test lamp from battery positive voltage (B+) to cavity 1 (BLK/WHT). Does the test lamp light? | -- | ||
11 | Replace the fog lamp switch. Refer to Fog Lamp Switch Replacement . Is the fog lamp switch replacement complete? | -- | Go to Fog Lights System Check | -- |
12 | Repair the open in CKT 351 (BLK/WHT) between the fog lamp switch and S222. Refer to Wiring Repairs in Wiring Systems. Is the circuit repair complete? | -- | Go to Fog Lights System Check | -- |
13 | Repair the open in CKT 1317 (DK GRN/WHT) between the underhood junction block and the DIM. Refer to Wiring Repairs in Wiring Systems. Is the circuit repair complete? | -- | Go to Fog Lights System Check | -- |
