Replacement Procedure
- Remove the RH insulator
panel. Refer to
Instrument Panel Insulator Panel Replacement
in Instrument Panel, Gauges and
Console.
- Remove the filter access cover.
- Remove the first filter
by pulling the filter tab.
- Remove the second filter by pulling the filter tab.
- Remove the third filter by pulling the filter tab.
Installation Procedure
- Install the first filter
into the HVAC module assembly.
- Use the tab and raise the filter, so that the leading edge catches
on the holding rib inside of the filter case.
- Install the second filter in the tab of the first filter.
- Slide the second filter into the remaining channels of the first
filter.
- Raise the filters, so that the leading edge catches on the holding
rib inside of the filter case.
- Install the third filter in the tab of the second filter.
- Slide the third filter into the remaining channels of the second
filter.
- Fold the second filter tab down and the third filter tab up over
the second.
- Install the
filter access cover.
- Install the RH insulator panel. Refer to
Instrument Panel Insulator Panel Replacement
in Instrument Panel, Gauges and Console.