Removal Procedure
- Open the rear compartment lid.
- Remove the navigation data processor filler panel (1),
if equipped with UY4.
- Remove the push in retainers (2)
from the top edge and the center of the trim panel at the rear compartment
access door.
- Remove the rear compartment front trim panel (1) from the
rear compartment.
Installation Procedure
- Install the rear compartment front trim
panel (1) to the rear compartment.
- Install the two retainer to the center of the trim panel at the
rear compartment access door.
- Install the remaining retainers (2) to the top edge of
the rear compartment front trim panel (1).
- Install the navigation data processor
filler panel (1), if equipped with UY4.
- Close the rear compartment lid.