Turn Signal and Multifunction Switch Assembly - Disassemble - Off Vehicle Power Tilt and Telescope

1. Remove the upper and lower trim covers. Refer to Steering Column Trim Covers - Disassemble - Off Vehicle .



2. Remove the blue (1), black (2), and gray (3) connectors of the turn signal and multifunction switch assembly.



3. Remove the 2 pan head tapping screws.
4. Remove the turn signal and multifunction switch assembly.

Turn Signal and Multifunction Switch Assembly - Disassemble - Off Vehicle Manual Tilt

1. Remove the upper and lower trim cover. Refer to Steering Column Trim Covers - Disassemble - Off Vehicle .



2. For the manual tilt column, remove the 2 wire harness straps (2). Remove the wire harness strap (2) from the steering column tilt head assembly (1).



3. Pop the wire harness assembly (1) from the wire harness strap (2).



4. Remove the blue (1), black (2), and gray (3) connectors of the turn signal and multifunction switch assembly.



5. Remove the 2 pan head tapping screws.



6. Remove the turn signal and multifunction switch assembly.

Turn Signal and Multifunction Switch Assembly - Disassemble - Off Vehicle Right Hand

1. Remove the upper and lower trim covers. Refer to Steering Column Trim Covers - Disassemble - Off Vehicle .



2. Remove the blue (1), black (2), and gray (3) connectors of the turn signal and multifunction switch assembly.



3. Remove the 2 pan head tapping screws (2).
4. Remove the turn signal and multifunction switch assembly (1).