Tools Required

J 38778 Door Trim Pad Clip Remover

1. Remove the front bucket seat. Refer to Front Seat Replacement - Bucket .



2. Remove the knobs (1,6,5) from the switch (4).



3. Remove the switch trim plate.
4. Lift the front seat cushion cover up in order to expose the switch.



5. Using the J 38778 remove the switch bracket fasteners.



6. Release the locking tabs on the bracket, and remove the bracket from the seat bottom frame.



7. Remove the switch from the bracket.
8. Disconnect the electrical connector from the switch.

1. Connect the electrical connector to the switch.



2. Install the switch into the switch bracket.



3. Install the bracket with the switch into the seat bottom.



4. Install the switch bracket fasteners into the seat bottom.



5. Pull the seat cover back down over the switch and align the holes in the cover to the switch assembly.
6. Install the switch trim plate bezel (2).



7. Install the knobs (1,6,5) on the switch (4).
8. Install the front bucket seat. Refer to Front Seat Replacement - Bucket .