Removal Procedure
- Remove the sunroof glass panel. Refer to
Sunroof Glass Panel Replacement
.
- Remove the two fasteners (2)
from the sunshade drain drip channel (3).
- Remove the sunshade drip channel (3).
- Slide the sunshade (4) forward to the closed position.
- Push the spring retainer
clips (1) on the right side of the sunshade (2) inward to disengage
them from the track (3) using an upwards lifting motion.
- Remove the sunshade (2) from the sunroof module.
Installation Procedure
- Engage one side of the
sunshade (2) by positioning the spring clips (1) into the track (3).
- Push the spring retainer clips (1) inward on the opposite
side of the sunshade (2) to engage them into the track.
- Slide the sunshade back and forth to ensure proper operation.
- Slide the sunshade to the half closed position.
- Install the rear drain
drip channel (3).
- Install the two drip channel fasteners (2).
- Install the sunroof glass panel. Refer to
Sunroof Glass Panel Replacement
.