Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Has Garage Door Opener System Check been performed? | -- | ||
2 | Press rear compartment or fuel door release buttons. Do rear compartment or fuel door releases actuate? | -- | ||
3 | Check that the GDO is fully seated in the overhead console. Is GDO installed properly? | -- | ||
4 |
Is the voltage within the specified range? | 10.5-15 Volts | ||
5 | Check for ground at C2 terminal 1 of connector with a DMM. Is a ground present? | 0-0.03 Volts | ||
6 | Check for battery voltage from C1 terminal 13 of overhead console flatwire harness to ground. Is battery voltage present? | 10.5-15 Volts | ||
7 | Check for ground at C1 terminal 12 of overhead console flatwire harness to headliner connector. Is a ground present? | 0-0.03 Volts | ||
8 | Repair the open or short to ground in CKT 253 (BRN) from C305 terminal A2 to C2 terminal A10 of rear fuse block. Is repair complete? | -- | -- | |
9 | Repair the open CKT 851 (BLK/WHT). Is repair complete? | -- | -- | |
10 | Turn valet switch to the OFF position. Is repair complete? | -- | -- | |
11 | Replace Garage Door Opener. Refer to Garage Door Opener Replacement . Is repair complete? | -- | -- | |
12 | Replace overhead console. Refer to Roof Console Replacement in interior trim. Is repair complete? | -- | -- |
