Removal Procedure
- Remove the rear shelf trim panel. Refer to
Rear Window Shelf Trim Panel Replacement
in Interior Trim.
- Disconnect the wiring from the GPS antenna module harness.
- Remove the pushpins retaining the GPS antenna module to the underside
of the rear shelf trim panel by pushing in on center of pushpin and then pulling
out the entire pushpin assembly.
- Remove the five wire retaining
clips for the antenna module wiring harness.
- Remove the GPS antenna module assembly from the rear shelf trim
panel.
Installation Procedure
- Install the GPS antenna module to the rear shelf trim panel.
- Reset the pushpins by pushing the center of the pushpin out.
- Install the pushpins through the antenna module into the rear
shelf trim panel.
- Install the wiring harness
retainers to the rear shelf trim panel.
- Install the rear shelf trim panel. Refer to
Rear Window Shelf Trim Panel Replacement
in Interior
Trim.
- Connect the antenna module wiring harness.