Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Was the entire Navigation System Check performed? | -- | Go to Navigation System Check | |
2 | Verify that the video component connected to the vehicle is operating properly. Is the video component operating properly? | -- | System OK | |
3 |
Is the voltage measured within the specified range? | 0 V | ||
4 | Measure the voltage between cavity A of the Aux RCA Video Jacks harness connector and ground with a DMM. Is the voltage measured within the specified range? | 0 V | ||
5 | Repair the short to B+ in circuit 2056 between cavity C of the Aux RCA Video Jacks connector and cavity 19 of the Navigation Display Module connector C3. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Navigation System Check | -- |
6 | Measure the resistance between cavity C of the Aux RCA Video Jacks harness connector and ground with a DMM. Is the resistance measured within the specified range? | 0-2 ohms | ||
7 | Repair the short to B+ in circuit 2057 between cavity A of the Aux RCA Video Jacks connector and cavity 6 of the Navigation Display Module connector C3. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Navigation System Check | -- |
8 | Measure the resistance between cavity A of the Aux RCA Video Jacks harness connector and ground with a DMM. Is the resistance measured within the specified range? | 0-2 ohms | ||
9 | Repair the short to ground in circuit 2056 between cavity C of the Aux RCA Video Jacks connector and cavity 19 of the Navigation Display Module connector C3. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Navigation System Check | -- |
10 |
Is the resistance measured within the specified range? | 0-2 ohms | ||
11 | Repair the short to ground in circuit 2057 between cavity A of the Aux RCA Video Jacks connector and cavity 6 of the Navigation Display Module connector C3. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Navigation System Check | -- |
12 | Measure the resistance between cavity A of the Aux RCA Video Jacks harness connector and cavity 6 of the Navigation Display Module harness connector C3 with a DMM. Is the resistance measured within the specified range? | 0-2 ohms | ||
13 | Repair the open in circuit 2056 between cavity C of the Aux RCA Video Jacks connector and cavity 19 of the Navigation Display Module connector C3. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Navigation System Check | -- |
14 | Measure the resistance between pin C of the Aux RCA Video Jacks pigtail connector and the male portion of the YELLOW Aux RCA Video Jack with a DMM. Is the resistance measured within the specified range? | 0-2 ohms | ||
15 | Repair the open in circuit 2057 between cavity A of the Aux RCA Video Jacks connector and cavity 6 of the Navigation Display Module connector C3. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Navigation System Check | -- |
16 | Measure the resistance between pin a of the Aux RCA Video Jacks pigtail connector and the female portion of the YELLOW Aux RCA Video Jack with a DMM. Is the resistance measured within the specified range? | 0-2 ohms | ||
17 | Replace the Navigation Display Module. Refer to Navigation Display Module Replacement in Instrument Panel, Gauges and Console. Is the replacement complete? | -- | Go to Navigation System Check | -- |
18 | Replace the Aux RCA Video Jacks. Refer to Auxiliary Audio/Video Input Control Replacement in Instrument Panel, Gauges and Console. Is the replacement complete? | -- | Go to Navigation System Check | -- |
