Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Instrument Cluster Diagnostic System Check? | -- | Go to Step 2 | |
2 |
Does the left turn signal input indicate ON? | -- | Go to Step 4 | Go to Step 3 |
3 | Test CKT 14 (LT BLU) for an open between connector C201 terminal A7 and instrument cluster connector C1 terminal B12. Is the wiring OK? | -- | Go to Step 6 | Go to Step 5 |
4 | Turn on the right turn signal. Does the right turn signal input indicate ON? | -- | Go to Step 8 | Go to Step 7 |
5 | Repair the open circuit. Did you complete the repair? | -- | -- | |
6 | Inspect connector C201 terminal A7 and instrument cluster connector C1 terminal B12 for poor terminal contact. Are the connections OK? | -- | Go to Step 8 | Go to Step 9 |
7 | Inspect CKT 15 (DK BLU) for an open between connector C201 terminal B7 and instrument cluster connector C1 terminal B11. Is the wiring OK? | -- | Go to Step 10 | Go to Step 5 |
8 | Replace the instrument cluster. Did you complete the repair? | -- | -- | |
9 | Repair the poor terminal contact. Did you complete the repair? | -- | -- | |
10 | Inspect connector 201 terminal B7 and instrument cluster connector C1 terminal B11 for poor terminal contact. Are the connections OK? | -- | Go to Step 8 | Go to Step 9 |
