Removal Procedure
- Open the instrument panel storage compartment door.
- Use a flat bladed tool to disengage the IP storage compartment bezel
retainers.
- Partially remove the bezel.
- Disconnect the electrical connector (1).
- Remove the bezel.
- Disengage the retainers fastening the rear compartment lid enable
switch.
Remove the rear compartment lid enable switch.
Installation Procedure
- Install the rear compartment lid enable switch to the instrument
panel storage compartment bezel .
Push the switch inward in order to fasten.
- Connect the rear compartment lid enable switch electrical connector (1).
- Align the IP storage compartment bezel to the IP storage compartment.
- Push the bezel inward in order to fasten.
- Close the instrument panel storage compartment door.