Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the entire Interior Lights Dimming System Check? | -- | Go to Step 2 | |
2 | Do the license lamps, underhood lamp, and cornering lamps operate properly? | -- | Go to Step 3 | Go to Exterior Lights System Check or Exterior Lights System Check |
3 | Do all VF displays dimming operate properly? | -- | Go to Step 4 | |
4 |
Is the resistance less than the specified value? | 0.5 ohms | Go to Step 5 | Go to Step 8 |
5 |
Is the resistance less than the specified value? | 0.5 ohms | Go to Step 6 | Go to Step 9 |
6 |
Is the voltage within the specified range? | 2.5 - 13 V | Go to Step 12 | Go to Step 10 |
7 | Replace the dash integration module (DIM). Refer to Body Control Module Replacement in Body Control System. Is the DIM replacement complete? | -- | -- | |
8 | Repair the open in CKT 32 (YEL) between the rear junction block and the DIM. Refer to Wiring Repairs in Wiring Systems. Is the circuit repair complete? | -- | -- | |
9 | Repair the open in CKT 1491 (YEL) between the DIM and C302. Refer to Wiring Repairs in Wiring Systems. Is the circuit repair complete? | -- | -- | |
10 | Connect a DMM from connector C304 cavity B7 (BLK) to ground. Is the resistance less than the specified value? | 0.5 ohms | Go to Step 7 | Go to Step 11 |
11 | Repair the open in CKT 350 (BLK) between connector C304 and ground G200. Refer to Wiring Repairs in Wiring Systems. Is the circuit repair complete? | -- | -- | |
12 | Repair the open in CKT 350 (BLK) between connector C304 and splice S318. Refer to Wiring Repairs in Wiring Systems. Is the circuit repair complete? | -- | -- |
