Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Was the entire Exterior Lights System Check performed? | -- | ||
2 | Backprobe the hazard switch assembly connector with a DMM from cavity G (ORN) to ground. Is the voltage within the specified range? | 10-15 V | ||
3 | Backprobe the hazard switch assembly connector with a DMM from cavity G (ORN) to cavity J (BLK). Is the voltage within the specified range? | 10-15 V | ||
4 | Replace the hazard switch assembly. Refer to Hazard Warning Switch Replacement . Is the hazard switch assembly replacement complete? | -- | -- | |
5 | Check the rear fuse block TSIG/HAZ Fuse for an open. Is the TSIG/HAZ Fuse OK? | -- | ||
6 | Repair the short to ground in CKT 1740 (ORN). Refer to Wiring Repairs in Wiring Systems. Is the circuit repair complete? | -- | -- | |
7 | Replace the TSIG/HAZ Fuse. Is the fuse replacement complete? | -- | -- | |
8 | Repair the open in CKT 1740 (ORN) between the rear fuse block and the hazard switch assembly. Refer to Wiring Repairs in Wiring Systems. Is the circuit repair complete? | -- | -- | |
9 | Repair the open in CKT 450 (BLK) between the hazard switch assembly and S210. Refer to Wiring Repairs in Wiring Systems. Is the circuit repair complete? | -- | -- |
