Removal Procedure
Important: Do not let the overhead console hang from the flat wire harness.
- Carefully pull down on the overhead console to release the four retainer
clips.
- Disconnect the flat wire electrical connector.
- Disconnect the cell phone microphone connector (if equipped).
- Remove the overhead console.
- Remove the three screws from the lamp retainer.
Important: Care should be taken when rotating the lamp retainer not to snag or
rip the flat wire harness.
- Rotate the lamp retainer from right to left.
- Replace the necessary bulb.
Installation Procedure
Important: Care should be taken when rotating the lamp retainer not to snag or
rip the flat wire harness.
- Rotate the lamp retainer back into place.
- Install the three screws.
- Connect the
flat wire harness.
- Connect the cell phone microphone connector (if equipped).
- Install the overhead console into the opening in the headliner.
- Push in on the overhead console to engage the four retainer clips.