Removal Procedure
The headlamp, foglamp switch assembly uses skin locks which grab the
soft skin material of the IP. The skin lock feature may cause the switch to
be hard to remove.
- Remove left IP end cap.
Refer to
Instrument Panel Outer Trim Cover Replacement
in Instrument Panel, Gauges and Console.
- Push on rear side of headlamp, foglamp switch assembly.
- Remove electrical connectors as necessary.
Installation Procedure
- Reconnect electrical connectors.
- Align headlamp, foglamp switch assembly with opening in IP and
push into position until flush with IP surface.
- Install left IP end cap. Refer to
Instrument Panel Outer Trim Cover Replacement
in Instrument Panel, Gauges and Console.