GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 1998 🢒 Seville 🢒 General Information 🢒 Cautions and Notices 🢒 Seat Horizontal and Vertical Drive Cable Replacement

Removal Procedure
  1. Disable the SIR system. Refer to Disabling the SIR System in SIR.
  2. Remove the front bucket seat. Refer to Front Seat Replacement - Bucket .
  3. Remove the seat cushion frame. Refer to Front Seat Cushion Frame Replacement .

    4. Object Number: 334291 Size: SH
  4. If the cable is equipped with a position sensor, remove the sensor retention clip and disconnect the electrical connector.
  5. Squeeze the collar of the cable to release the cable.

    6. Object Number: 334292 Size: SH
  6. Pull the cable out of the fitting until the cable end clears the fitting.
  7. Remove the cable or cable/sensor assembly.

Installation Procedure

    Object Number: 334292 Size: SH
  1. Install the cable or cable/sensor assembly by pushing the ends into the fittings until the clip snaps into place.
  2. If the cable is equipped with a position sensor, install the sensor retention clip and connect the electrical connector.
  3. Install the seat cushion frame. Refer to Front Seat Cushion Frame Replacement .
  4. Install the front bucket seat. Refer to Front Seat Replacement - Bucket .
  5. Enable the SIR system. Refer to Enabling the SIR System in SIR.
  6. If the vehicle is equipped with memory seats, calibrate the seat. Refer to Memory Seat Calibration .