Emblem/Nameplate Replacement. Cadillac Seville 1998

For 1990-2009 cars only

Makes 🢒 Cadillac 🢒 1998 🢒 Seville 🢒 Body and Accessories 🢒 Exterior Trim 🢒 Emblem/Nameplate Replacement

Wash the affected panel with a soap and water mixture.
Dry the affected panel using a clean cloth.
Remove all traces of adhesive from the panel and from the back of the emblem/nameplate (1) using 3M General Purpose Adhesive Cleaner 08984 or equivalent.
Wipe the panel with a clean cloth and an alcohol and water mixture.

Using the dimensions, mark the proper position of the emblem/nameplate with a length of masking tape or a magnetic strip (2).
If the body is below 21°C (70°F), warm the affected panel with a heat lamp or a heat gun while proceeding with the following step.
If necessary, apply a double-coated acrylic foam tape such as 3M Super Automotive Attachment Tape (3M 06380 which has a white backing, 3M 06377 which has a black backing, or 3M 06382 which has a gray backing) or equivalent to the emblem/nameplate.

Wash the affected panel with a soap and water mixture.
Dry the affected panel using a clean cloth.
Remove all traces of adhesive from the panel and from the back of the emblem/nameplate using 3M General Purpose Adhesive Cleaner 08984 or equivalent.
Wipe the panel with a clean cloth and an alcohol and water mixture.

Using the dimensions, mark the proper position of the emblem/nameplate with a length of masking tape or a magnetic strip.
If the body is below 21°C (70°F), warm the affected panel with a heat lamp or a heat gun while proceeding with the following step.
If necessary, apply a double-coated acrylic foam tape such as 3M Super Automotive Attachment Tape (3M 06380 which has a white backing, 3M 06377 which has a black backing, or 3M 06382 which has a gray backing) or equivalent to the emblem/nameplate.

Wash the affected panel (1) with a soap and water mixture.
Dry the affected panel using a clean cloth.
Remove all traces of adhesive from the panel and from the back of the emblem/nameplate using 3M General Purpose Adhesive Cleaner 08984 or equivalent.
Wipe the panel with a clean cloth and an alcohol and water mixture.

Using the dimensions, mark the proper position of the emblem/nameplate with a length of masking tape or a magnetic strip (2).
If the body is below 21°C (70°F), warm the affected panel with a heat lamp or a heat gun while proceeding with the following step.
If necessary, apply a double-coated acrylic foam tape such as 3M Super Automotive Attachment Tape (3M 06380 which has a white backing, 3M 06377 which has a black backing, or 3M 06382 which has a gray backing) or equivalent to the emblem/nameplate.

Wash the affected panel with a soap and water mixture.
Dry the affected panel using a clean cloth.
Remove all traces of adhesive from the panel and from the back of the emblem/nameplate using 3M General Purpose Adhesive Cleaner 08984 or equivalent.
Wipe the panel with a clean cloth and an alcohol and water mixture.

Mark the proper position of the emblem/nameplate with a length of masking tape or a magnetic strip.
If the body is below 21°C (70°F), warm the affected panel with a heat lamp or a heat gun while proceeding with the following step.
If necessary, apply a double-coated acrylic foam tape such as 3M Super Automotive Attachment Tape (3M 06380 which has a white backing, 3M 06377 which has a black backing, or 3M 06382 which has a gray backing) or equivalent to the emblem/nameplate.