Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
DEFINITION: The RH power mirror does not move up and down. The LH power mirror moves as commanded. | ||||
1 | Was the Power Door System Diagnostic System Check performed? | -- | Go to Step 2 | |
2 |
Does the motor run? | -- | Go to Step 3 | Go to Step 4 |
3 | Replace the RH front door module. Refer to Door Control Module Replacement . Is the replacement complete? | -- | -- | |
4 | Reverse the connections at RH front door module harness connector C4 terminals 1 and 5. Does the motor run? | -- | Go to Step 3 | Go to Step 5 |
5 | Test CKT 1498 (YEL) for an open or a short to ground. Is the circuit OK? | -- | Go to Step 6 | Go to Step 7 |
6 | Test CKT 889 (LT GRN) for an open or a short to ground. Is the circuit OK? | -- | Go to Step 8 | Go to Step 9 |
7 | Test CKT 1598 (YEL) for an open or a short to ground. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
8 | Replace the RH Power Mirror Vertical motor. Refer to Power Mirror Replacement . Is the replacement complete? | -- | -- | |
9 | Test CKT 889 (LT GRN) for an open or a short to ground. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
