Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Was Instrument Cluster System Check performed? | -- | Go to Step 2 | |
2 |
Does A or B reset to zero ? | -- | Go to Step 3 | |
3 |
Does the RESET TRIP Switch input toggle from ON to OFF when button is pressed? | -- | Go to Step 11 | Go to Step 4 |
4 | Does the ENG/MET button work? | -- | Go to Step 5 | Go to Step 8 |
5 |
When the jumper is added and removed does the scan tool RESET TRIP switch input toggle from ON to OFF ? | -- | Go to Step 10 | Go to Step 6 |
6 | Check for CKT 376 (LT GRN) for an open or short to ground. Was there a problem with CKT 376? | -- | Go to Step 7 | Go to Step 11 |
7 | Repair CKT 376 (LT GRN). Is the repair complete? | -- | -- | |
8 | Check for CKT 351 (BLK/WHT) for an open. Was there a problem with CKT 351? | -- | Go to Step 9 | Go to Step 10 |
9 | Repair CKT 351 (BLK/WHT). Is the repair complete? | -- | -- | |
10 | Replace the LH IPC control (DIC) switch. Refer to Driver Information Display Switch Replacement . Is the repair complete? | -- | -- | |
11 | Replace the Instrument Cluster (IPC). Refer to Instrument Cluster Replacement . Is the Instrument Cluster (IPC) replacement complete? | -- | -- |
