1

Turn the ignition ON with radio OFF.

The radio displays the time of day.

Radio Display Inoperative, No Sound from Speakers

2

1. Turn radio on.
2. Connect a scan tool to the data link connector (DLC).
3. Select radio (IRC).
4. Select inputs 1 menu.
5. Press, then release each radio button in the order listed on the scan tool.

1. Radio turns on.
2. Each button changes state, as observed on the scan tool, when pressed then released.

Radio control inoperative, replace the radio. Refer to Radio Replacement

3

Using the test tape in the Audio System Diagnostic Kit J 39916A, check all audio system functions following the directions on the tape.

All functions operate properly with no reception or noise characteristics.

4

Using the test CD in the Audio System Diagnostic Kit J 39916A, check all audio system functions following the directions on the CD.

All functions operate properly with no reception or noise characteristics.

5

1. Using the scan tool, select dash integration module (DIM).
2. Select inputs menu.
3. Press, then release each steering wheel control.

Each steering wheel control input changes state, as displayed on the scan tool, when the control is pressed, then released.

Steering Wheel Controls Inoperative

6

1. Using the scan tool, select radio (IRC).
2. Select data 1 menu.
3. Tune radio to a known strong FM station.
4. Tune radio to a known strong AM station.

1. For the FM station, the scan tool signal strength is at least 45 dB.
2. For the AM station, the scan tool signal strength is at least 45 dB.

Antenna Diagnostic Check

7

If the vehicle is equipped with a remote CD changer, insert and play a known good CD. (Use the one in the Audio System Diagnostic Kit J 39916A.)

CD changer works properly and produces good sound.

Remote Playback Device Inoperative

* Refer to the appropriate symptom diagnostic table for the applicable abnormal result.