Preliminary Procedures

1. Remove the rear bumper impact bar. Refer to Rear Bumper Impact Bar Replacement.
2. Lower the rear of the exhaust system. Refer to Exhaust System Replacement.
3. Remove ALC Compressor, if equipped. Refer to Air Compressor Replacement

1

Rear Energy Absorber Bolt (Qty: 1)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
25 N·m (18 lb ft)

2

Rear Energy Absorber Nut (Qty: 3)

Tighten
25 N·m (18 lb ft)

3

Rear Energy Absorber