Warning: The high intensity discharge system produces high voltage and current. To reduce the risk of severe shocks and burns:

Warning: The high intensity discharge system produces high voltage and current. In order to reduce the risk of severe shocks and burns, the battery negative cable must be disconnected any time service work is being performed on or around the high intensity discharge system.

Preliminary Procedure

Remove the headlamp assembly. Refer to Headlamp Replacement.

1

Ballast Access Cover Screw

Caution: Refer to Fastener Caution in the Preface section.

Tighten
3 N·m (27 lb in)

2

Ballast Access Cover

3

Headlamp Ballast Assembly

Tip
Disconnect all electrical connectors before attempting removal.

Warning: The high intensity discharge system produces high voltage and current. To reduce the risk of severe shocks and burns:

Warning: The high intensity discharge system produces high voltage and current. In order to reduce the risk of severe shocks and burns, the battery negative cable must be disconnected any time service work is being performed on or around the high intensity discharge system.

Preliminary Procedure

Remove the headlamp assembly. Refer to Headlamp Replacement.

1

Ballast Access Cover Screw

Caution: Refer to Fastener Caution in the Preface section.

Tighten
Hand tighten the screw.

2

Ballast Access Cover

3

Headlamp Ballast

Tip
Disconnect the two electrical connectors as ballast is being removed from the headlamp housing.