Caution: Refer to Exterior Trim Emblem Removal Caution in the Preface section.

Preliminary Procedure

1. Apply masking tape to the rear edge of the front side turn signal lamp.
2. Using a small flat-bladed tool, gently pry at the rear edge of the lamp assembly.
3. Carefully rotate the lamp forward in order to remove the lamp from the fender opening.

1

Front Side Turn Signal Lamp

Tip
Rotate the bulb socket and remove the socket from the lamp assembly.

2

Front Side Turn Signal Lamp Bulb

Warning: Refer to Halogen Bulb Warning in the Preface section.

Tip
Remove the bulb from the lamp socket, if applicable.