Preliminary Procedures

1. Many automatic transmission shift control related complaints can be corrected with linkage adjustment. DO NOT replace a shifter assembly without first attempting to correct the condition with the linkage adjustment procedure.
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
3. Disconnect the shift linkage from the shift control. Refer to Shift Control Linkage Replacement .
4. Lower the vehicle.
5. Remove the shift control knob. Refer to Transmission Control Lever Knob Replacement .
6. Remove the center console assembly. Refer to Front Floor Console Replacement .
7. Disconnect the electrical connector from the shift control.

1

Shift Control Nut (Qty: 4)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
12 N·m (106 lb in)

2

Shift Control