Scan Tool Output Control | Additional Menu Selection(s) | Description 3.6L (LY7) |
|---|---|---|
Engine Output Controls | GEN L-Terminal | The engine control module (ECM) commands the generator OFF by removing the 5 V reference signal from the L terminal of the voltage regulator when you select Off. The generator will then stop generating an output voltage. |
Engine Output Controls | Starter Relay Control | The engine control module (ECM) grounds the starter relay control circuit when ON is selected. When Off is selected, ground is removed from the circuit |
Scan Tool Output Control | Additional Menu Selection(s) | Description 4.6L (LH2) |
|---|---|---|
Engine Output Controls | GEN L-Terminal | The engine control module (ECM) commands the generator OFF by removing the 5 V reference signal from the L terminal of the voltage regulator when you select Off. The generator will then stop generating an output voltage. |
