For 1990-2009 cars only
Inner Drive Belt
- Route the inner drive belt around the following:
- Insert a 1/2 inch drive ratchet into the inner drive belt tensioner.
- Rotate the drive belt tensioner clockwise.
- Route the remainder of the drive belt around the drive belt idler.
- Slowly rotate the drive belt tensioner counter-clockwise until the drive belt is tight.
- Remove the 1/2 inch drive ratchet.
- Inspect the drive belt for proper seating in all pulleys.
| • | Crankshaft balancer |
| • | Air conditioning compressor |
| • | Drive belt tensioner |
| • | Power steering pump |
Outer Drive Belt
- Route the outer drive belt around the following:
- Insert a 1/2 inch drive ratchet into the outer drive belt tensioner.
- Rotate the drive belt tensioner clockwise.
- Route the remainder of the drive belt around the drive belt tensioner.
- Slowly rotate the drive belt tensioner counter-clockwise until the drive belt is tight.
- Remove the 1/2 inch drive ratchet.
- Inspect the drive belt for proper seating in all pulleys.
- Place the power steering pump reservoir.
- Install the upper inboard power steering pump reservoir bolt.
- Install the lower outboard power steering pump reservoir bolts.
- Install the power steering reservoir hose to the power steering pump.
- Compress and reposition the clamp on the power steering reservoir hose at the power steering pump.
| • | Crankshaft balancer |
| • | Generator |
| • | Water pump pulley |
Tighten
Tighten the upper inboard power steering pump reservoir
bolt to 10 N·m (89 lb in).
Tighten
Tighten the lower outboard power steering pump reservoir
bolts to 40 N·m (30 lb ft).
