For 1990-2009 cars only
Removal Procedure
- Open the front sunroof window until the air deflector is in the full upright position.
- Remove the air deflector fabric cover by releasing the J-strips (2) from the deflector frame (1).
- Remove the screws (3, 4) securing the hinges on the air deflector to the sunroof module assembly.
- Remove the air deflector from the sunroof module assembly.
Installation Procedure
- Ensure that the spring loaded bases are rotated forward and are evenly aligned with the holes in the sunroof module assembly.
- Position the air deflector bases to the sunroof module assembly.
- Pull the air deflector hinges outward in order to secure the hinges to the module assembly.
- Loosely install the hinge screws.
- Center the air deflector side to side on the sunroof module assembly.
- Secure the air deflector screws (3, 4).
- Install the air deflector fabric cover with sewn-in J-strips.
- Ensure that the bumper (2) is secure to the sunroof module assembly.
- Secure the foam pad at the front side of the deflector in order to prevent noise when the air deflector moves to the closed position.
- Close the front sunroof window.
- Verify the operation of the air deflector.
Caution: Refer to Fastener Caution in the Preface section.
Tighten
Tighten the screws to 5 N·m (44 lb in).
