Special Tools

J 45012 Holding Fixture

For equivalent regional tools, refer to Special Tools.

1. Put transmission in park.
2. Install J 45012 Holding Fixture , to hold the prop shaft flange (31).

Note: Discard retainer (30), seal (32), washer (33) and nut (34).

3. Remove the prop shaft flange nut (34).
4. Remove the prop shaft flange washer (33) and seal (32).
5. Remove the prop shaft flange (31) and the output shaft assembly retainer (30).
6. Slowly rotate the transmission to a vertical position, with the bell housing facing up, and allow any excess fluid to drain.