For 1990-2009 cars only
Removal Procedure
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
- Remove and support the exhaust from the catalytic converters. Refer to Exhaust System Replacement.
- Remove the transmission mount lower mounting nuts.
- Support the transmission with a screw jack and block of wood.
- Remove the outer transmission mounting bolts.
- Remove the inner transmission mounting bolts.
- Remove the transmission support from the vehicle.
Installation Procedure
- Install the transmission support to the vehicle.
- Install the inner transmission support mounting bolts. Do not tighten at this time.
- Install the outer transmission mounting bolts and tighten to 60 N·m (44 lb ft).
- Remove the screw jack.
- Install the transmission mount lower mounting nuts and tighten to 60 N·m (44 lb ft).
- Install the exhaust system to the catalytic converters. Refer to Exhaust System Replacement.
- Remove the support from the exhaust system.
- Lower the vehicle.
Caution: Refer to Fastener Caution in the Preface section.
