For 1990-2009 cars only
Battery Voltage Signal: The scan tool displays 9.0-16.0 Volts. The state of the battery voltage feed to the door module or door switch selected.
Driver LF Window Switch: The scan tool displays Idle/Up/Down/Express Up/Express Down. The driver window switch state of the DDM, where a switch transition is displayed as Up, Down, Express Up, or Express Down.
Driver LR Window Switch: The scan tool displays Idle/Up/Down/Express Up/Express Down. The passenger window switch state of the DDM, where a switch transition is displayed as Up, Down, Express Up, or Express Down.
Driver RF Window Switch: The scan tool displays Idle/Up/Down/Express Up/Express Down. The passenger window switch state of the DDM, where a switch transition is displayed as Up, Down, Express Up, or Express Down.
Driver RR Window Switch: The scan tool displays Idle/Up/Down/Express Up/Express Down. The passenger window switch state of the DDM, where a switch transition is displayed as Up, Down, Express Up, or Express Down.
Front Window Motor Status: The scan tool displays Off/Up/Down/Reverse/Vent/Open/Short/Close. The current status of the driver power window motor.
Front Window Motor Fault Status: The scan tool displays No Fault/Motor Fault/Hall Fault/Memory Fault/LIN Fault/Anti-Trap Fault/Thermo Active/Not Normalized. The current status of the driver power window motor. If a fault is detected by the DDM the can tool will display which fault has been detected.
Passenger Window Switch: The scan tool displays Idle/Up/Down/Express Up/Express Down. The passenger window switch state of the PDM, where a switch transition is displayed as Up, Down, Express Up, or Express Down.
Rear Window Motor Status: The scan tool displays Off/Up/Down/Reverse/Vent/Open/Short/Close. The current status of the left rear power window motor.
Rear Window Motor Fault Status: The scan tool displays No Fault/Motor Fault/Hall Fault/Memory Fault/LIN Fault/Anti-Trap Fault/Thermo Active/Not Normalized. The current status of the left rear power window motor. If a fault is detected by the DDM the can tool will display which fault has been detected.
Rear Window Switch 12 Ref.: The scan tool displays the current 12 Volt reference available at the DDM.
Window Lockout Switch Indicator Command: The scan tool displays Off/On. The DDM will display the current state of the lockout switch indicator backlighting.
Window Lockout Switch: The scan tool displays Off/On. The DDM will display the current state of the lockout switch.
Window Switch Backlight: The scan tool displays a percent. The scan tool will display the level of backlighting intensity that the window lockout switch indicator is currently at. As the backlighting becomes brighter the percent will increase.
Driver LF Window Switch: The scan tool displays Idle/Up/Down/Express Up/Express Down. The driver window switch state of the DDM, where a switch transition is displayed as Up, Down, Express Up, or Express Down.
Driver LR Window Switch: The scan tool displays Idle/Up/Down/Express Up/Express Down. The passenger window switch state of the DDM, where a switch transition is displayed as Up, Down, Express Up, or Express Down.
Driver RF Window Switch: The scan tool displays Idle/Up/Down/Express Up/Express Down. The passenger window switch state of the DDM, where a switch transition is displayed as Up, Down, Express Up, or Express Down.
Driver RR Window Switch: The scan tool displays Idle/Up/Down/Express Up/Express Down. The passenger window switch state of the DDM, where a switch transition is displayed as Up, Down, Express Up, or Express Down.
Front Window Motor Status: The scan tool displays Off/Up/Down/Reverse/Vent/Open/Short/Close. The current status of the driver power window motor.
Front Window Motor Fault Status: The scan tool displays No Fault/Motor Fault/Hall Fault/Memory Fault/LIN Fault/Anti-Trap Fault/Thermo Active/Not Normalized. The current status of the driver power window motor. If a fault is detected by the DDM the can tool will display which fault has been detected.
Passenger Window Switch: The scan tool displays Idle/Up/Down/Express Up/Express Down. The passenger window switch state of the PDM, where a switch transition is displayed as Up, Down, Express Up, or Express Down.
Rear Window Motor Status: The scan tool displays Off/Up/Down/Reverse/Vent/Open/Short/Close. The current status of the left rear power window motor.
Rear Window Motor Fault Status: The scan tool displays No Fault/Motor Fault/Hall Fault/Memory Fault/LIN Fault/Anti-Trap Fault/Thermo Active/Not Normalized. The current status of the left rear power window motor. If a fault is detected by the DDM the can tool will display which fault has been detected.
Rear Window Switch 12 Ref.: The scan tool displays the current 12 Volt reference available at the DDM.
Window Lockout Switch Indicator Command: The scan tool displays Off/On. The DDM will display the current state of the lockout switch indicator backlighting.
Window Lockout Switch: The scan tool displays Off/On. The DDM will display the current state of the lockout switch.
Window Switch Backlight: The scan tool displays a percent. The scan tool will display the level of backlighting intensity that the window lockout switch indicator is currently at. As the backlighting becomes brighter the percent will increase.
