Caution: The high intensity discharge system produces high voltage and current. In order to reduce the risk of severe shocks and burns, the battery negative cable must be disconnected any time service work is being performed on or around the high intensity discharge system.

Caution: The high intensity discharge system produces high voltage and current. To reduce the risk of severe shocks and burns:

Preliminary Procedures

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation.
3. Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement.

1

Front Fog Lamp Bracket Screw (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
2 N·m (18 lb in)

2

Bumper Fascia Bracket Screw

Tighten
2 N·m (18 lb in)

3

Fog Lamp Bracket Push-in Retainer (Qty: 2)

4

Front Park / Turn Signal / Fog Lamp Bracket

Procedure

Remove the front park / turn signal / fog lamp assembly from the bracket. Refer to Front Parking and Turn Signal and Fog Lamp Assembly Replacement.