| Table 1: | Instrument Panel Cluster (IPC) |
| Table 2: | Engine Control Module (ECM) |
Scan Tool Output Control | Additional Menu Selections | Description |
|---|---|---|
IPC Gauge Sweep Test | Special Functions | The instrument panel cluster (IPC) drives all of the gages at or above maximum for a few seconds when you select ON, then drives all of the gages at or below minimum for a few seconds. The IPC Display Test will end after one cycle of the gage sweep. |
Displays Test | Special Functions | The IPC illuminates all of the indicators for 7 seconds when you select ON. The IPC turns off the indicators after the 7 seconds. |
Dimming | Special Functions | The DIC and the PRNDL display segments turn ON and OFF when commanded from the scan tool. |
Scan Tool Output Control | Additional Menu Selections | Description |
|---|---|---|
Special Functions | Malfunction Indicator Lamp (MIL) | The engine control module (ECM) commands the MIL indicator ON and OFF. |
