GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2007 🢒 SRX 🢒 Engine 🢒 Engine Mechanical - 3.6L 🢒 Crankshaft Balancer Removal

Tools Required

    • EN 46106 Flywheel Holding Tool
    • J 24420-C Harmonic Balancer Puller
    • J 38416-2 Crankshaft Button

    Object Number: 945978 Size: SH
  1. Install the EN 46106 through the starter mounting hole.

    2. Object Number: 1855641 Size: SH
  2. Remove the crankshaft balancer bolt.

    3. Object Number: 1855642 Size: SH
  3. Install the J 38416-2 in the nose of the crankshaft.

    4. Object Number: 1855643 Size: SH
  4. Install the J 24420-C in order to remove the crankshaft balancer.

    5. Object Number: 1855644 Size: SH
  5. Pull the crankshaft balancer off by tightening the center bolt on the J 24420-C until the crankshaft balancer pulls off of the crankshaft end.
  6. Remove the J 24420-C from the crankshaft balancer.