ā¢ | J 24420-C Crankshaft Balancer Remover |
ā¢ | J 38416-2 Crankshaft Button |
ā¢ | J 41998-B Crankshaft Balancer Installer |
ā¢ | J 45059 Angle Meter |
ā¢ | EN-48018 Flywheel Holding Tool |
Notice: Refer to Fastener Notice in the Preface section.
Tighten
Tighten the bolt to 50 NĀ·m (37 lb ft).
Tighten the bolt an additional 120 degrees using the J 45059 .