Service VME - 2004 SRX Rear Bumper Fascia Wavy Along Top Shelf - kw appearance body fit warp
| Subject: | 2004 SRX Rear Bumper Fascia Wavy Along Top Shelf |
| Models: | . |
The following diagnosis might be helpful if the vehicle exhibits the symptom described in the PI.
Service VME
.
Condition/Concern:
Rear bumper fascia wavy/warped along top shelf or horizontal surface caused by cross-car fascia growth in sunlight.
Recommendation/Instructions:
If replacing the rear bumper fascia for this condition, also replace the four fascia to rear end panel bolts. The new bolt has an unthreaded shoulder portion to allow cross-car expansion of the fascia. The new bolt part number is 11609480. Use service information document ID 885470 for the procedure, and labor operation B0608 Fascia, Rear Bumper, One Piece - Replace for claim submission.
.
Please follow this diagnosis process thoroughly and complete each step. If the condition exhibited is resolved without completing every step, the remaining steps do not need to be performed. If these steps do not resolve the condition, please contact GM TAC for further diagnostic assistance.
Models:
(04 Cadillac SRX)
.
