Right Front Door to Fender Interference - kw appearance body contact fit front molding right

When servicing the vehicle with the VIN you entered, the following diagnosis might be helpful if the vehicle exhibits the described symptoms.

The right (passenger) side front door may contact the fender at or near the lower molding area when opening the door. To inspect for this condition, carefully open and close the right front door while observing the clearance between the door and the fender at the lower leading edge of the door in the molding or cladding area. If the door contacts or binds to the fender, or if there is insufficient clearance, adjust the fender outboard to the door. This may be accomplished in most cases with the door open by pulling the fender outboard using hand pressure only.

.

Please follow this diagnosis process thoroughly and complete each step. If the condition exhibited is resolved without completing every step, the remaining steps do not need to be performed. If these steps do not resolve the condition, please contact GM TAC for further diagnostic assistance. This diagnostic approach was developed for the vehicle with the VIN you entered and should not be automatically be used for other vehicles with similar symptoms.

(04 Cadillac SRX)

.