Controls | US | Export |
---|---|---|
Band | Changes between AM/FM1/FM2/WX | |
CD | Displays the CD control screen | |
DVD | Displays the DVD control screen | Changes to TV mode |
Tune/Seek | Allows the system to tune to the next preprogrammed station or to seek stations in the area | |
Audio Adjust | Displays the audio adjust screen | Displays the audio/TV adjust screen |
RPT | Press to repeat the last voice guidance | |
Map | Press to enter map mode | |
Route | Initiates the route planning routine | |
Menu | Press to change system settings | |
Tilt | Press and hold to access DVD | Press and hold to access DVD. Momentarily depress to tilt the display screen. |
The navigation system contains the following components:
• | Navigation Radio |
• | Global positioning system (GPS) antenna |
The export navigation system contains the following additional components:
• | Vehicle information communication system (VICS) microprocessor card |
• | VICS optical/microwave beacon antenna |
• | Four TV antennae integrated into the rear window glass |
• | VICS FM antenna integrated into the rear glass |
• | TV antenna module to control antenna selection |
• | Two TV antenna amplifiers |
This component acts as the operator interface for the navigation system, provides the data input from the operator to the navigation system and provides navigation information to the operator via the display screen. The navigation radio is located in the center of the instrument panel. The navigation radio provides the following:
• | A display screen. All navigation, audio and TV functions are displayed on this screen. |
• | Soft key buttons on the display to allow selection from menus and to operate the navigation system, the audio system and the export TV system. |
• | The navigation system map with routing information displayed on the navigation radio screen. |
• | The navigation system map with routing information displayed on the navigation radio screen. |
• | Provides verbal guidance to the operator. |
The GPS antenna receives data from the GPS satellites and routes this information to the navigation radio to be processed into positional data. The GPS antenna is powered through the same coaxial cable.
These several antennae are conductive traces placed on the inside of the rear window glass.
The TV antenna module is located behind the trim on the right rear side of the passenger compartment. The TV antenna module is used by the navigation radio to automatically select the antenna combination that provides the strongest TV signal to the navigation radio. The TV antenna module also provides the VICS FM signal to the VICS card (export, w/UE9).
The TV antenna amplifiers are mounted behind the trim on each side of the rear window. The TV antenna amplifiers are powered by the TV antenna module through the same coaxial cable used to carry their signals to the TV antenna module. They are attached to two of the four TV antenna trace patterns in the rear window glass.
The auxiliary RCA video jacks, used to attach a remote video device, are located at the rear of the center console. These connections may be used to provide audio and video input from a video player or camera to the navigation radio.
The vehicle information communication system (VICS) card, an export only dealer-installed option, is installed inside the navigation radio. The VICS card uses signals from the optical/microwave beacon antenna and the rear glass VICS antenna via the TV antenna module to convey routing information to the NAV. The NAV either revises planned routing or relays the VICS information to the operator through the screen of the navigation radio and the voice guidance system.
The vehicle information communication system (VICS) optical/microwave beacon antenna (export, w/UE9) is a dealer-installed option. The antenna, which is mounted on the right side of the instrument panel, picks up signals through the front window glass. A coaxial cable carries the power to and signals from this antenna to the navigation radio.
The navigation radio controls the audio system by sending key-pressed messages to the remote radio and displaying audio information.