Tools Required
• | J 45845
Caster and Camber Adjusting Tool |
- Install the
J 45845
or the
J-45845-10
to the lower control arm and the frame.
- Loosen the lower control arm to frame bolt.
Notice: Refer to Fastener Notice in the Preface section.
- Adjust the camber angle by turning the turnbuckle on
J 45845
or the
J-45845-10
until the specifications have been met.
Tighten
Tighten the bolt to 135 N·m (96 lb ft).
- Verify that the camber is still with specifications. Refer to
Wheel Alignment Specifications
.
- Adjust the rear toe. Refer to
Rear Toe Adjustment
.