J 28410 Gasket Remover

1. Remove any old thread sealant, gasket material or sealant using J 28410 .
2. Clean the oil pan and oil pan components in solvent.
3. Clean out debris from the bolt holes.

Caution: Refer to Safety Glasses Caution in the Preface section.

4. Dry the oil pan and oil pan components with compressed air.

1. Inspect the exterior of the oil pan for the following conditions:

•	Damage to the drain plug or drain plug hole

•	Damage to the transaxle mounting bosses

•	Damage to the oil level/condition sensor bolt hole threads

•	Damage to the oil level/condition sensor hole

•	Damage to the transaxle brace mounting bosses

•	Dents or damage to the exterior




2. Inspect the interior of the oil pan for the following conditions:

•	Gouges or damage to the oil pan sealing surfaces

•	Damage to the oil pan baffle

•	Damage to the oil pan scraper

•	Damage to the bolt holes

3. Repair or replace the oil pan and/or oil pan components as necessary.