GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

    Warning: Refer to SIR Warning in the Preface section.


    Object Number: 2009265  Size: SH
  1. Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement.
  2. Remove the seat belt buckle fasteners and remove the seat belt buckle.
  3. Disconnect the wiring connection to the left and right seat belt buckles.
  4. Remove the seat belt buckles from the floor pan.

Installation Procedure

    Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 2009265  Size: SH
  1. Install the rear seat belt buckles to the floor pan.
  2. Tighten
    Tighten the seat belt buckle fasteners to 42 N·m (31 lb ft).

  3. Connect the left and right rear seat belt buckle electrical connectors.
  4. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement.