GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2009 🢒 SLS 🢒 Power and Signal Distribution 🢒 Data Communications 🢒 Data Link Connector Replacement

Removal Procedure
  1. Remove the knee bolster trim. Refer to Knee Bolster Replacement.
  2. Remove the screws (1) securing the data link connector to the instrument panel (I/P).

Installation Procedure

    Object Number: 1386648 Size: SH
  1. Locate the connector of the I/P.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the screws (1) securing the connector to the I/P.

    3. Tighten
    Tighten the screws to 2 N·m (18 lb in).

  3. Install the knee bolster trim. Refer to Knee Bolster Replacement.