Step | Action | Yes | No |
---|---|---|---|
Schematic Reference: Instrument Cluster Schematics. Connector End View Reference: Component Connector End Views or Inline Harness Connector End Views | |||
1 | Did you perform the Diagnostic System Check - Vehicle? | Go to Step 2 | |
2 | Start the engine. Does the engine oil pressure indicator illuminate after the displays test? | Go to Step 3 | Go to Testing for Intermittent Conditions and Poor Connections |
3 | Replace the instrument panel cluster (IPC). Refer to Control Module References for replacement, setup and programming. Did you complete the replacement? | Go to Step 4 | -- |
4 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 2 |