SOME OWNERS MAY COMMENT THAT THE END OF THE PARK LAMP BEZELS MAY APPEAR TO HAVE SHARP CORNERS ON THE END OF THE BEZEL. CORNERS WERE REVISED TO GIVE A SOFTER APPEARANCE.
MANUFACTURING PROCESS AND PART TOOLING.
REPLACE OLD PARK LAMP BEZEL P/N 10233120 RH AND P/N 10233121 LH WITH NEW P/N 10250884 RH AND P/N 10250885 LH. SEE FIGURE 1 FOR REFERENCE.
PARTS ARE CURRENTLY AVAILABLE FROM GMSPO.
LABOR OPERATION: T-3372 RH; T-3373 LH LABOR TIME: 0.3 HR.
FIGURES: 1
GENERAL MOTORS BULLETINS ARE INTENDED FOR USE BY PROFESSIONAL TECHNICIANS, NOT A "DO-IT-YOURSELFER". THEY ARE WRITTEN TO INFORM THOSE TECHNICIANS OF CONDITIONS THAT MAY OCCUR ON SOME VEHICLES, OR TO PROVIDE INFORMATION THAT COULD ASSIST IN THE PROPER SERVICE OF A VEHICLE. PROPERLY TRAINED TECHNICIANS HAVE THE EQUIPMENT, TOOLS, SAFETY INSTRUCTIONS AND KNOW-HOW TO DO A JOB PROPERLY AND SAFELY. IF A CONDITION IS DESCRIBED, DO NOT ASSUME THAT THE BULLETIN APPLIES TO YOUR VEHICLE, OR THAT YOUR VEHICLE WILL HAVE THAT CONDITION. SEE A GENERAL MOTORS DEALER SERVICING YOUR BRAND OF GENERAL MOTORS VEHICLE FOR INFORMATION ON WHETHER YOUR VEHICLE MAY BENEFIT FROM THE INFORMATION.
COPYRIGHT 1993 GENERAL MOTORS CORPORATION. ALL RIGHTS RESERVED.